// UNO Monitor Daemon v.0.1.0
// Kidacro <kidacro@archamedis.net>
// https://kidacro.archamedis.net/git/kidacro/Arduino/src/branch/main/uno-stats-monitor
//
// unomond.conf - Configuration file

// in ms (1 second = 1000 ms) - do not set too low or the systat calls *may* return junk
delay = 10000;

// tty device to use (most common for arduino based boards on *nix)
tty = "/dev/ttyACM0";

// logfile - leave undefined for console output (syslog is always used if possible for hard errors)
logfile = "";

// # of charcaters of display
line_length = 16;

// # of lines of display
line_count = 2;

// LED brightness (0 to 15)
led_brightness = 0;

// LED delay for dot display (keep at 3 or more)
led_delay = 3;

// LCD delay between writing characters (keep at 5 or more)
lcd_delay = 5;

// readings
// doesnt have to be cpu, any temperature reading in C will do
cpu_temp_file = "/sys/class/hwmon/hwmon1/temp11_input";
cpu_fanspeed_file = "/sys/class/hwmon/hwmon1/temp11_input";

// drives (free space stats)
// dev note: for a 16 line display, 3 drives will barely fit depending on the GB available so choose wisely
// list of mountpoints (or directories daemon user has access to) - NOT devices!
drive_free_space = [ "/", "/mnt/local", "/mnt/store" ]

// IR command config
// TODO: lookup xf86 and/or dbus commands for multimedia control
ircmd_P = "echo Power Pressed"; // P power
ircmd_M = "echo Mute Pressed"; // mute
ircmd_m = "echo Mode Pressed"; // mode
ircmd_p = "echo Back Pressed"; //  back
ircmd_f = "echo Forward Pressed"; //  forward
ircmd_e = "echo EQ Pressed"; //  eq
ircmd_minus = "echo Volume Down Pressed"; //  vol down
ircmd_plus = "echo Volume Down Pressed"; //  vol up
ircmd_r = "echo Return Pressed"; //  return
ircmd_u = "echo Usb Scan Pressed"; //  usb scan
ircmd_0 = "echo 1 Pressed"; //  number 1
ircmd_2 = "echo 2 Pressed"; //  number 2
ircmd_3 = "echo 3 Pressed"; //  number 3
ircmd_4 = "echo 4 Pressed"; //  number 4
ircmd_5 = "echo 5 Pressed"; //  number 5
ircmd_6 = "echo 6 Pressed"; //  number 6
ircmd_7 = "echo 7 Pressed"; //  number 7
ircmd_8 = "echo 8 Pressed"; //  number 8
ircmd_9 = "echo 9 Pressed"; //  number 9
ircmd_R = "echo Repeat Pressed"; //  repeat
ircmd_Z = "echo Unknown Pressed"; //  other button pressed