// Daemon config
delay = 10000; // in ms (1 second = 1000 ms) - do not set too low or the systat calls will return junk
tty = "/dev/ttyACM0"; // tty device to use (most common for arduino based boards on *nix)
logfile = ""; // logfile - leave undefined for console output (syslog is always used if possible for hard errors)
line_length = 16; // unused but will be needed
line_count = 2; // unused but will be needed

// readings
cpu_temp_file = "/sys/class/hwmon/hwmon1/temp11_input"; // doesnt have to be cpu, any temperature reading in C will do
cpu_fanspeed_file = "/sys/class/hwmon/hwmon1/temp11_input";

// drives (free space stats)
// dev note: for a 16 line display, 3 drives will barely fit depending on the GB available so choose wisely
drive_free_space = [ "/", "/mnt/local", "/mnt/store" ] // list of mountpoints - NOT devices!

// IR command config
// TODO: lookup xf86 and/or dbus commands for multimedia control
ircmd_P = "echo Power Pressed"; // P power
ircmd_M = "echo Mute Pressed"; // mute
ircmd_m = "echo Mode Pressed"; // mode
ircmd_p = "echo Back Pressed"; //  back
ircmd_f = "echo Forward Pressed"; //  forward
ircmd_e = "echo EQ Pressed"; //  eq
ircmd_minus = "echo Volume Down Pressed"; //  vol down
ircmd_plus = "echo Volume Down Pressed"; //  vol up
ircmd_r = "echo Return Pressed"; //  return
ircmd_u = "echo Usb Scan Pressed"; //  usb scan
ircmd_0 = "echo 1 Pressed"; //  number 1
ircmd_2 = "echo 2 Pressed"; //  number 2
ircmd_3 = "echo 3 Pressed"; //  number 3
ircmd_4 = "echo 4 Pressed"; //  number 4
ircmd_5 = "echo 5 Pressed"; //  number 5
ircmd_6 = "echo 6 Pressed"; //  number 6
ircmd_7 = "echo 7 Pressed"; //  number 7
ircmd_8 = "echo 8 Pressed"; //  number 8
ircmd_9 = "echo 9 Pressed"; //  number 9
ircmd_R = "echo Repeat Pressed"; //  repeat
ircmd_Z = "echo Unknown Pressed"; //  other button pressed